We are offering a one time deal on first-come first-serve basis to install an interlocking shingles metal roof using our steel or aluminum products. We will offer this promotion to first two customers who’s roof meets our requirements for this promotion – one Aluminum metal roof shingles roof and one steel metal shingles roof. If your roof qualifies you will receive a 25% discount of our normal pricing, which you can find using our metal roof price calculator. Your new metal roof can cost you only $750 per square instead of an average $1000+ per square.

Don’t wait – act now, as only two of this promotional roofs (one aluminum shingle roof and one steel shingle roof) will be installed at these prices, after which this deal will be gone forever! Get your discounted metal roof today.

Why we are offering this promotional deal?

You may ask – what’s the catch? To be honest there is no catch, and this is not one of those “slow season promotions”. Your roof will not be a “model home”, although if it is located on a busy road, it will be a big plus.  We not necessary going to place a yard sign in front of your house for “x” number of months, or send hordes of potential clients to see your roof.

We need to shoot a video of a complete metal roof installation process and for this video, we need a certain type of roof (more about it in qualification requirements bellow). The roof must presents certain level of difficulty and a minimum number of roof flashing details, such as sky-lights, chimneys, valleys, roof-to-wall flashing, etc.  We will need this video soon, and instead of waiting for such roof to come along, we decided to speed up the process, by offering this promotion to first two clients with qualifying roofs.

Roof qualification requirements to get this promotion:

Bellow is a diagram of what your roof should look like to qualify for our promotion. If your roof has different orientation, it is fine as long as it the items listed bellow this diagram.

To qualify, you roof must be located in Massachusetts, Connecticut, Rhode Island or southern New Hampshire. Your roof mus have the following:

1. Valleys
2. Multiple sky-lights
3. Masonry chimney
4. Sidewall – vertical roof-to-wall connection
5. Preferably hip sections and a dormers

The items above must be present on the roof, in order for our video to show different aspects of metal roofing installation and different flashing details, except for item number 5 – hips and dormers which may not be practical or present on every roof with a lower slope.

Your roof must be walkable (3-5 pitch) for the camera men to be able to safely move around installation crew. If your roof does not have the items, it will not qualify for this promotion.

Roof Tear-off:

For the purposes of this promotion your existing roof will be removed and ALL rotten wood will be repaired / replaced.

It is not always necessary to tear off an existing roof and even more so when the metal roof is installed. Although tearing of old roof is often a preferred method, there are certain aspects of why it may not / should not be done, which I will discuss in details in a separate post on our Flat Roofing blog. In a nut-shell, the tear of does not need to be done if your roof currently has one layer of asphalt shingles. Building codes allow up-to two layers of roofing material on the roof. Since metal roof is so light-weight, its impact will be minimal and there is no real disadvantage of going over existing asphalt shingles.

If you have ceder shingles or slate roof (it is highly unlikely to have slate on low slope roof), it is necessary to remove it in order to install a metal roof. There are three reasons for this: You cannot install anything over a slate roof since it is stone and you simply will not be able to fasten new roof to the deck. Metal roof should not be installed over ceder shingles because it is not a smooth surface and also because cedar shingles are often installed over 1×4″ battens spaced 6 inches from each other. There is no solid nailing substrate for a metal roof and the cedar shingles are usually rotten by the time they have to be replaced.

What is the benefit to you?

You will get a lifetime roof, installed above and beyond the best installation practices in metal roofing. This is not to say that we do not do it on every other roof, but for the purposes of this installation video, each flashing detail will be done thoroughly by the book, which in most cases is not necessary, when there is a simpler detail that works the same way. For example there are at leas three correct ways to do a skylight flashing, so that it would never leak In this case we will use each way to flash a skylight in order to demonstrate how it can be done.

Promotional metal roofing price:

Basically you will get a professionally installed, lifetime metal roof, which is usually priced at $1000-1100 per one roofing square (100 square feet of roof area) for about $750-825 per square – a 25% discount as mentioned above. This price is for a steel interlocking metal shingles. Aluminum will be slightly more, due to material price difference.

Your new metal roof will be installed using pre-made and field formed flashing accessories, and with the following specs:

- Grace Ice & Water shield along the eaves and valleys.

- GAF Deck Armor – a premium breathable synthetic underlayment installed over the rest of the roof.

- New vent pipe boots installed over “stink pipe”.

- New ridge ventilation system installed using our own method – Metal Roof ridge vent installation designed to prevent leaks. Note – you need functioning soffit vents for the ridge vent system to work. If you do not have them we can install new soffit vents for you. If it is not a feasible option a vented drip edge will be installed instead of soffit vents.

Please note – by taking this deal you will agree to forfeit all copyrights to the videos and photographs taking on your roof, and of the roof installation to us.

If you have a qualifying roof any where in MA, CT, RI and southern NH, fill out our online metal roofing estimate form, including details about your roof and don’t forget to mention this promotion – otherwise you will not get the discount (actually you will if we see that your roof qualifies, we will tell you about this promotion even if you do not know about it!