Lanco 5 Gal. Ultra-Siliconizer Roof Sealer is a silicone-based roof coating designed to protect various roofing substrates from moisture, UV rays, and temperature fluctuations. This guide explains its key features, application methods, and maintenance tips to help homeowners and contractors achieve long-lasting waterproofing and energy efficiency.
Product Overview
What it is: A high-solids, elastomeric silicone roof sealer sold in five-gallon units, engineered to form a flexible, water-repellent barrier on roofs. The product adheres to a range of substrates, including metal, single-pply membranes, concrete, and modified bitumen, when properly prepared.
Core benefits: Outstanding water resistance, excellent UV stability, resistance to ponding water, and long-term elasticity. It helps reduce heat transfer, extends roof life, and minimizes maintenance costs over time.
Key Features And Benefits
- Ultra-Siliconizer Formulation provides superior reflectivity and weather resistance, helping curb cooling costs in hot climates.
- High Elasticity accommodates substrate movement without cracking or debonding, essential for roofs subject to thermal expansion.
- Waterproof Seam Seal seals flashing, seams, and details to prevent leaks in standing water and heavy rainfall.
- UV Stability minimizes chalking and degradation under prolonged sun exposure, extending service life.
- Wide Substrate Compatibility supports many common US roofing systems with proper preparation.
How It Works
The product cures by moisture in the air to form a durable silicone film. As a silicone-based coating, it creates a continuous, flexible barrier that remains watertight even as substrates expand and contract with temperature changes. This elasticity reduces the risk of micro-cracks that can allow moisture intrusion.
Surface Preparation
Proper surface prep is essential for adhesion and performance. Begin by cleaning and drying the roof surface to remove dirt, dust, oils, and grass or moss. Repair any structural damage, loose fasteners, or deteriorated membranes. For metal roofs, remove rust and apply any recommended primer. It may be necessary to rinse with water and allow a full dry time before coating. Always follow the manufacturer’s technical data sheet for substrate-specific prep steps.
Application Instructions
Use appropriate PPE and ensure good ventilation if applying indoors or in enclosed areas. Stir thoroughly before use. Apply in temperatures within the product’s specified range, typically between 50°F and 90°F (10°C to 32°C). Apply with a brush, roller, or air-assisted spray designed for silicone coatings. For best results, apply a uniform first coat and allow it to dry to a tack-free state before applying a second coat for additional thickness and uniformity. Do not apply over damp surfaces or frozen substrates.
Don’t Overpay for Roofing Services – Call 877-801-4315 Now to Compare Local Quotes!
Coating Coverage And Mil Thickness
Coverage rates will vary depending on substrate porosity and surface texture. A typical figure is 40–80 square feet per gallon per coat, but consult the product specs for exact numbers. For leakage-prone areas, apply extra coats to achieve adequate mil thickness per the data sheet.
Temperature And Weather Windows
Plan applications during dry periods with extended forecasts of no precipitation for at least 24 hours. Avoid applying in direct sun if temperatures exceed the maximum listed in the tech data sheet, and do not apply to surfaces that are hotter than recommended, as this can hinder adhesion and cure time.
Curing And Recoating
The sealant cures through ambient moisture; curing times depend on temperature, humidity, and coat thickness. A typical dry-to-touch time ranges from 4 to 12 hours, with full cure extending over several days. Surface may be recoated after the previous coat reaches a tack-free state according to the data sheet. Avoid foot traffic until fully cured and titled sections to prevent surface damage.
Safety Considerations
Read the Safety Data Sheet (SDS) before use. Wear protective gloves, eye protection, and respiratory protection as recommended. Ensure proper ventilation. Dispose of containers and excess material in accordance with local regulations. Keep away from heat sources and open flames during application and curing, as silicone coatings can be flammable prior to full cure in certain formulations.
Maintenance And Longevity
Routine inspection after severe weather helps identify any areas needing touch-ups. The silicone coating resists ponding water but should be monitored for adhesion on aging roofs. Recoat intervals vary by climate, roof exposure, and substrate condition. In high-UV, arid climates, expect longer intervals between maintenance cycles; in coastal or high-humidity environments, plan for more frequent checks.
Substrate Compatibility And Limitations
Lanco Ultra-Siliconizer adheres to a variety of roof substrates when properly prepared. Substrates commonly compatible include metal, single-pply membranes, concrete, and modified bitumen. Limitations include excessive ponding water on porous surfaces without proper drainage, organic growth that hasn’t been removed, and substrates with residual solvents or incompatible primers. Always confirm compatibility with a small test area before full-scale application.
Environmental Considerations
Silicone-based sealers typically have low VOC content compared with solvent-rich coatings, contributing to lower odor and reduced air exposure. The durable film also reduces heat gain and may contribute to energy savings. Proper disposal and recycling of containers align with local regulations for consumer roof coatings.
Don’t Overpay for Roofing Services – Call 877-801-4315 Now to Compare Local Quotes!
Common Questions
- Q: Can Lanco Ultra-Siliconizer be applied over existing coatings?
- A: Yes, after proper surface preparation and ensuring the existing coating is compatible and sound.
- Q: Is a primer needed?
- A: Some substrates may require primer; follow the technical data sheet for substrate-specific priming instructions.
- Q: How long does it take to cure?
- A: Dry-to-touch times vary; full cure can take several days depending on humidity and temperature.
Recommended Accessories And Tools
- Primers and cleaners specified by the manufacturer for surface preparation
- Brush, roller, or air-assisted spray equipment suitable for silicone coatings
- Protective gear including gloves and eye protection
- Ladders and fall-protection gear when working on elevated roofs
Cost And Value Considerations
Five-gallon containers provide cost efficiency for larger roof areas. While upfront material costs may be higher than some traditional acrylic coatings, the long-term durability, energy savings from reflectivity, and reduced maintenance can yield favorable total cost of ownership. Compare product specs, warranty details, and expected service life when evaluating options.
Final Recommendations
For best results, conduct thorough surface preparation, adhere to recommended application conditions, and apply multiple coats as needed to achieve uniform coverage and proper mil thickness. Use the product data sheet as the primary reference for substrate-specific guidance, cure times, and safety.