The Fakro brand offers a wide range of roof window sizes to fit different roof pitches, room dimensions, and design preferences. Understanding standard dimensions, measuring methods, and compatibility with accessories helps homeowners choose the right model for both new installations and replacements. This guide highlights typical Fakro roof window sizes, how to measure accurately, and practical tips for selecting the best fit for various spaces.
Standard Fakro Roof Window Sizes
Fakro manufactures a variety of roof windows in metric and imperial dimensions to accommodate most roof pitches and ceiling heights. Standard sizes are commonly available in widths from 78 cm to 134 cm and heights from 118 cm to 140 cm. The most popular rectangular window sizes include combinations such as 78 x 118 cm, 78 x 98 cm, 94 x 118 cm, and 114 x 118 cm. Circular and asymmetric models are less common but available in specific lines. When selecting a size, consider both the usable glass area and the overall frame dimensions to ensure proper handling and operation.
Key points to consider include:
- Glass area vs. frame size: Larger glass areas maximize daylight but may require stronger supporting structures.
- Rafter and ridge alignment: Ensure the window aligns with roof framing to prevent gaps and wind uplift.
- Vent options: Some sizes pair with fixed transoms or venting options for natural airflow.
How To Measure For Fakro Roof Windows
Accurate measurements are essential for a proper fit. Start by measuring the roof opening’s width and height at the planned installation location. Measure at multiple points to account for any irregularities in the roof slope. Record the narrowest width and the tallest height to determine the correct size. Consider the finished interior headroom and the external fascia to determine whether the opening can accommodate standard frames or if bespoke customization is required.
Measurement steps include:
- Width measurement: Measure across the rafters at the widest point of the opening.
- Height measurement: Measure from the bottom edge of the opening to the top edge along the centerline.
- Ridge clearance: Verify there is enough space between the window head and the roof ridge for operation and insulation.
- Clearance for installation: Check surrounding insulation and airtightness requirements in your region.
Popular Fakro Models And Their Dimensions
Fakro’s product lines include fixed, tilt-and-turn, and opening vent windows, each offered in multiple sizes. Below is a representative selection of common dimensions across several lines. Always verify current catalogs for exact availability, as sizes can vary by model and region.
Don’t Overpay for Roofing Services – Call 877-801-4315 Now to Compare Local Quotes!
| Model Line | Common Width x Height (cm) | Common Width x Height (inches) | Notes |
|---|---|---|---|
| FKR | 78 x 118 | 31 x 46 | Standard opening with tilt/vent options |
| FKR U6 | 78 x 98 | 31 x 39 | Slimmer footprint for restricted headroom |
| FKD | 114 x 118 | 45 x 46 | Fixed unit with high daylight |
| FDY | 94 x 118 | 37 x 46 | Opening vent with dual control |
| FKV | 78 x 118 | 31 x 46 | Vent-only or opening variants |
| FPP | 134 x 118 | 53 x 46 | Large pane for expansive views |
Accessories, Extensions, And Retrofit Considerations
Choosing the right accessories can affect the effective size and performance of a Fakro roof window. Consider intakes such as flashings, skylight blinds, insect screens, and energy-efficient glazing options. For retrofit projects, matching the existing rough opening is crucial; sometimes a slightly larger or smaller unit may be needed with a compatible extension or trim kit. Some installations benefit from skin-tight flashing kits designed for specific roof profiles and insulation requirements.
Common considerations include:
- Flashing type: Choose between flat, universal, or roof-specific flashings to ensure a weather-tight seal.
- Glazing options: Double- or triple-glazed panes with low-emissivity coatings improve insulation and reduce heat loss.
- Blind and shade integrations: External or internal shading can influence the perceived size and glare reduction.
- Energy performance: Larger windows may need higher U-value performance and solar heat gain controls.
Practical Sizing Tips For Different Rooms
Room function and ceiling height influence window size decisions. For living spaces and kitchens, larger windows provide daylight and views, while bedrooms may benefit from dual-opening configurations for ventilation. Bathrooms may require moisture resistance and privacy features. In spaces with limited wall area, taller, narrower units can maximize natural light without overwhelming the room.
- Small rooms: Consider 78 x 98 cm or 78 x 118 cm for balanced light and ventilation.
- Medium rooms: Sizes such as 94 x 118 cm or 114 x 118 cm offer generous daylight with flexible operation.
- Open-plan spaces: Larger units like 134 x 118 cm provide expansive views and strong ventilation capabilities.
Installation And Replacement Considerations
Professional installation ensures weatherproofing and energy efficiency. When replacing an existing window, verify the rough opening dimensions and adjust as necessary with compatible trim kits. Pay attention to mounting orientation, which affects drainage and condensation management. After installation, a thorough seal and insulation check helps prevent drafts and heat loss. Regular maintenance, such as cleaning glazing seals and inspecting flashing for wear, maintains performance over time.
Key steps include:
- Inspect roof structure: Confirm rafters are sound and can support the window frame.
- Seal properly: Use the correct flashing kit and sealant to prevent leaks.
- Ventilation planning: Ensure operable windows align with typical room airflow patterns.
- Energy considerations: Select glazing and shading options to balance daylight with thermal comfort.