Professionally installed vinyl siding cost: $4.35 to $9.50 per square foot
DIY vinyl siding cost: $2.15 to $4.50 per square foot
All the vinyl siding cost details are found here.
This is the most comprehensive vinyl siding cost calculator you’ll find online. It covers:
- Material costs and cost factors for new vinyl siding (new construction) and vinyl siding replacement on an existing home
- Installation labor costs and factors and what you save with DIY
- Vinyl siding price for your siding options like horizontal plank, vertical vinyl siding, insulated vinyl siding, vinyl cedar shake siding and vinyl shingle siding
- Siding cost comparisons with fiber cement, aluminum, steel, wood siding and more
- Vinyl siding cost estimate information you can use to narrow down and estimate vinyl siding prices for your home
- Exterior vinyl siding costs for various home sizes
- How to calculate how much vinyl siding you need
How Much Does Vinyl Siding Cost Now?
The cost of vinyl siding installed by a contractor is $4.35 to $9.50 per square foot for all the materials – siding, corners, J-channel, other trim and accessories and fasteners.
This is the vinyl siding price range for everything you need plus the labor to install it.
If you DIY, there is obviously no labor cost. So, for the materials only, the DIY vinyl siding cost is $2.15 to $4.50 per square foot.
The biggest factor in material cost is whether you use vinyl planks only or whether you include faux stone and shake/shingle vinyl panels. Other cost factors are detailed below to help you narrow down your vinyl siding cost estimates.
New Vinyl Siding Cost
Let’s start with material costs.
How much does a box of vinyl siding cost?
2022 prices are $70 to $280 for a box of siding containing one square or 100 square feet of siding.
That is, obviously, $0.70 (70 cents) to $2.80 per square foot. Here are cost ranges followed by a chart showing vinyl siding cost factors to help you estimate your final price.
Remember: You need all the installation materials too.
New vinyl siding cost is more than just the cost of the planks or panels. It’s a mistake to say, “I need 20 squares, and it costs $150 per square / per box, so I guess my vinyl siding price is $3,000.”
You must factor in nails, starter strip, J-channel, F-channel, H-channel, outside and inside corners, and possibly soffit too, which is usually replaced or installed along with siding. Other common accessories are gable vent covers, outlet trim and lighting mounting plates.
All these “extras” cost $1.50 to $2.50 per square foot – that’s an extra $150 to $250 for materials.
Average Price for Vinyl Siding
The average price for vinyl siding installed by a contractor is $6.50 per square foot, or $650 per square.
The average cost of vinyl siding with DIY installation is $3.60 per square foot or $360 per square for all necessary materials and fasteners.
This chart shows the cost of vinyl siding in Low/Average/High ranges. Cost factors are shown on the left and explained below along with tips on how to get the best price on vinyl siding.
| Low Cost | Average Cost | High Cost | |
| $2.15 – $5.50/sq.ft. | $5.50 – $7.50/sq.ft. | $7.50 – $9.50/sq.ft. | |
| Quality | Low or Average | Average or Good | Good or Premium |
| Thickness | Less than .042″ | .042″ to .046″ | .046″ or thicker |
| Premium Color | No | Yes or No | Yes |
| Shingles/Shakes | None | Up to 10% | Up to 25% |
| Insulated | No | Yes or No | Yes or No |
| Who Installs It | DIY or Pro | Pro | Pro |
| House Complexity | Easy | Easy or Average | Average or Complex |
| Old Siding Removal | No or DIY | Yes or No | Yes |
Cost factors include:
- Quality and thickness: These are often combined. Cheap siding starts at about .038” thick. Average grades are .042” and .044” thick. Anything .046” and thicker is considered premium vinyl siding.
- Better-quality siding often has deeper woodgrain texturing too for a more authentic look and feel.
- Color: Premium colors are darker, and the cost rises by about 50 cents per square foot for most options. It’s not a huge expense and worth the money for a color you really like.
- Shingles/Shakes: Panels of cedar vinyl shakes and vinyl shingles cost about twice as much or more than vinyl planks. Expect to pay $3.50 to $6.00 per square foot for these enhanced materials.
- Insulated vinyl siding: The cost for insulated siding is $1.00 to $1.50 per square foot more than for non-insulated siding. For the money, you get about R-1.8 to R-2.2 of insulation value.
- DIY vs professional installation: As we noted above, you can save labor costs of $3.00 to $5.00 per square foot depending on exactly who you hire and the complexity of the job.
- House complexity: The more corners and trimming a home has, in other words, the more elaborate the design, the higher the labor cost will be. A two-story home costs more for labor than a single-story ranch too.
- Old siding removal: In siding replacement jobs, removing and disposing of the old siding costs $1.00 to $2.00 per square foot. Even if you hire a pro for siding installation, removing the old siding can be quite easy and will save you quite a bit of money.
Getting the Best Price on Vinyl Siding
You can also save money by choosing affordable materials, which are usually a little thinner. And avoid using a lot of vinyl cedar shake siding and vinyl shingle siding.
If you can DIY removal, installation or both, you’ll definitely get the best price on vinyl siding whatever materials you use.
Vertical Vinyl Siding Cost vs Horizontal
Vertical vinyl siding, also called board & batten vinyl siding, is usually average to premium in quality. So, the cheap price is eliminated.
As a result, vertical vinyl siding cost vs horizontal is $6.00 to $9.35 per square foot compared with the wider range of $4.35 to $9.50 per square foot for horizontal siding options.
The cost factors are the same as with horizontal siding. Using vinyl shakes and shingles in combination with vinyl board and batten siding is a popular style too, so consider that option when estimating vertical vinyl siding price.
Vinyl Siding Cost Per Square and Per Square Foot
We’ve been throwing out costs and cost factors. This section gets very specific with costs and vinyl siding cost comparisons to your other top siding options.
When you include the siding plus all installation supplies and accessories (J-channel, starter strip, nails, etc.), vinyl siding cost per square and per square foot are $170 to $480 per square, which is $1.70 to $4.80 per square foot.
Vinyl Siding Material Cost
This chart allows you to compare prices, for example, if you’re wondering about the fiber cement siding vs vinyl siding cost comparison.
These are material costs only. The cost of installation labor raises these prices by $2.00 to $5.00 per square foot for most siding types and up to $10.00 per square foot for brick.
| Vinyl Siding Material | Cost Per Square | Cost Per Square Foot |
| Vinyl siding | $170 – $480 | $1.70 – $4.80 |
| Fiber cement siding | $375 – $615 | $3.75 – $6.15 |
| Hardie board siding | $425 – $615 | $425 – $615 |
| Aluminum siding | $270 – $525 | $2.70 – $5.25 |
| Steel siding | $250 – $495 | $2.50 – $4.95 |
| Wood siding | $490 – $850 | $4.90 – $8.50 |
| Brick siding (full or veneer) | $700 – $1,800 | $7.00 – $18.00 |
Labor costs for all plank horizontal and vertical siding materials – vinyl, aluminum, steel and wood – are roughly the same. Hardie board, aka fiber cement, costs more to install because it is a hassle to cut and is heavy, so large pieces often require two sets of hands. Brick siding is the most labor-intensive, so labor costs are highest.
How Much Siding Do I Need?
You need enough to cover the entire exterior of your home plus about 5% to 10% for waste, trimming and spare material for replacing damaged planks later.
Measure the length x height of each section of your home. Don’t factor in windows and doors, since that’s where some of the waste comes from.
For gables, use the area of a triangle formula: Area equals ½ the base x height.
Add all your measurements to get the total square feet of siding needed.
Example: Consider a simple 4-sided home that is 28 feet wide and 60 feet long with 8-foot exterior walls and gable ends.
- 1. 60’ long x 9’ high x 2 walls = 1080 square feet
- 2. 28’ wide x 9’ high x 2 walls = 504 square feet
- 3. 2 gables 28’ wide and 8’ tall (1/2x28x8) x 2 = 224 square feet
Subtotal: 1080 + 504 + 224 = 1808 square feet
Total: 1632 x 1.10 (10% extra) = 1988 square feet
Total squares/cartons of siding: 1988/100 = 19.8
Rounding up to the nearest square, you will need 20 squares of material, and each carton usually contains a square, so 20 cartons of siding.
Vinyl Siding Cost Estimator
This section does the math for you. We use the formulas explained above to determine the average amount of siding needed for common sizes of homes.
Then we turn that into the number of squares needed and finally your average cost ranges using our installed vinyl siding cost for materials plus labor of $4.35 to $9.50 per square foot.
Tip: Use the cost factors explained above to determine where in the price range your estimate is likely to fall. If you buy cheap siding for a simple-shaped home, for example, the cost will be around $4.35 to $5.50 with pro installation.
For premium siding on a complex home, cost will range closer to $8.50 to $9.50 per square foot.
| House Size | Average Squares Needed | Vinyl Siding Cost |
| Costs | Based On | $4.35 to $9.50 /square foot |
| 1,000 sq ft | 15 squares | $6,525 – $14,250 |
| 1,100 sq ft | 16 squares | $6,960 – $15,200 |
| 1,200 sq ft | 17 squares | $7,395 – $16,150 |
| 1,300 sq ft | 18 squares | $7,830 – $17,100 |
| 1,400 sq ft | 18-19 squares | $7,830 – $18,050 |
| 1,500 sq ft | 19 squares | $8,265 – $18,050 |
| 1,600 sq ft | 20 squares | $8,700 – $19,000 |
| 1,700 sq ft | 20-21 squares | $8,700 – $19,950 |
| 1,800 sq ft | 21 squares | $9,135 – $19,950 |
| 1,900 sq ft | 22 squares | $9,570 – $20,900 |
| 2,000 sq ft | 22-23 squares | $9,570 – $21,850 |
| 2,100 sq ft | 23 squares | $10,005 – $21,850 |
| 2,200 sq ft | 23-24 squares | $10,100 – $22,800 |
| 2,300 sq ft | 24 squares | $10,440 – $23,500 |
| 2,400 sq ft | 24-25 squares | $10,650 – $23,650 |
| 2,500 sq ft | 25 squares | $10,875 – $23,750 |
How much does it cost to put vinyl siding on a 1,500 sq ft house?
Using the Cost Estimator Table, you’ll see that a typical house of that size needs 19 squares of material. At the installed cost of $4.35 to $9.50, total cost would be $8,265 – $18,050 depending on quality, type, house complexity, etc. An average cost would be around $14,000.
Vinyl siding cost for 1,000 sq ft house would be $6,500 to $14,000 with an average of about $9,500.
How Much Does It Cost to Put Vinyl Siding on a House?
The average cost for homeowners in a 2,000 square foot house is $15,500.
The total cost range for most homes starts at around $6,500 for a small ranch or bungalow. If you own a larger home of 2,500 and choose premium siding, the cost comes close to $25,000.
House size is obviously the largest factor followed by the factors we’ve listed such as type of vinyl, its quality, house complexity and who does the work.
How Much Does It Cost to Remove and Replace Vinyl Siding?
Here are costs to remove old vinyl siding and install fresh vinyl plus a look at pricing for removing and replacing other siding types with vinyl.
Vinyl siding replacement cost ranges from $4.60 to $9.50.
When you remove the old siding and take it to recycling, you can save $1.00 to $2.00 per square foot in removal and disposal fees.
- Vinyl for vinyl: An average cost to replace vinyl siding is around $7.25 per square foot when old vinyl is removed and disposed of. Old vinyl siding can be recycled – contact your local recycling center to see if they take it.
- Wood for vinyl: The cost to replace wood siding with vinyl is about the same as a vinyl for vinyl exchange – $4.75 to $9.00 per square foot. Wood can be recycled or burned for fuel.
- Aluminum for vinyl: The cost to replace aluminum siding with vinyl siding is also in the $4.60 to $9.50 per square foot range – and aluminum is easily recycled too.
- Brick for vinyl: Brick takes a lot more time to remove, so the brick removal fee might be estimated separately. When the vinyl siding contractor handles it, the cost to replace brick with vinyl is $6.00 to $10.00 per square foot.
- Vinyl for brick: If you have vinyl and want brick, the cost to replace vinyl siding with brick ranges from $12.00 to more than $24.00 per square foot. Tip: Most homes with vinyl siding do not have foundations that will accommodate full brick – but you might be able to use brick veneer siding that looks much like full brick.
How Much Does it Cost to Have New Vinyl Siding Installed?
How much does it cost to install vinyl siding? Most homeowners pay vinyl siding installation cost of $4.35 to $9.50 per square foot for the material and labor.
Average cost to install vinyl siding is between $5.50 to $7.50 for a home:
- Using average .044” thick siding
- In a standard color
- Using a small amount of vinyl cedar shake siding or vinyl shingle siding in the gables, around the base of the house or around a front stoop
Higher or lower cost: Cost will rise if you use thicker or insulated siding in a premium style with a lot of vinyl cedar shake siding or vinyl shingle siding. The vinyl siding cost per square foot installed will be less if you use thin siding and no shingle or shake siding.
Labor Cost to Install Vinyl Siding
What is the average labor cost to install vinyl siding?
Installation labor averages about $3.50 per square foot or $350 per square.
The labor cost to install vinyl siding per square is $250 to $500 or $2.50 to $5.00 per square foot. The complexity of the house, number of corners and levels plus local labor costs affect the price.
So, that’s what you can save by doing it yourself. The DIY vinyl siding cost is $2.15 to $4.50 per square foot. This cost includes all the siding and materials needed for installation such as J-channel, trim, etc.
FAQs
Can you replace just one piece of vinyl siding?
Yes. There’s a vinyl siding tool called a zip tool. It allows you to separate planks from one another.
Then, the damaged piece of siding can be removed and a new piece nailed in where it was. Then the new piece can be “zipped” together with the piece below it using the special tool. The tool costs less than $10, and the job is pretty easy for a handy person.
You can also replace just one piece of wood siding, aluminum siding or steel siding using specific but common tools.
How Much Does Siding Repair Cost?
The cost to repair siding is $5.00 to $8.00 per square foot plus the cost of the material. For common materials, siding repair cost for the material and labor is:
- Vinyl: $7.50 – $15.00 per square foot
- Aluminum and Steel: $9.00 to $12.00 per square foot
- Fiber cement siding: $10.00 – $14.00 per square foot
- Wood plank siding: $10.00 – $17.00 per square foot
- Brick or stone: $12.00 – $30.00 per square foot
Is it cheaper to paint vinyl siding or replace? Is it worth it to paint vinyl siding?
Paint contractors charge $2.00 to $3.50 per square foot for painting, so it is cheaper to paint the house than to replace the siding.
However, if the siding is more than 10 years old, it should be replaced rather than painted. It isn’t worth spending the money on painting it when you’ll have to replace the siding in the next 5-15 years depending on its quality. Put your money toward new siding that will last 20-30 years.
How much does it cost to pressure wash a 2,000 sq ft house?
At a cost of $.40 to $.55 per square foot (40-55 cents), the cost to pressure wash the siding on a 2,000 square foot home is $800 to $1,200 depending on the exact amount of siding.
Has Vinyl Siding Gone Up in Price in 2022?
Yes. According to the Associated General Contractors of America, the cost of plastic construction materials including vinyl siding jumped by 12% in 2022.